Lenovo 7X16 Reference Download Page 98

Page: 98 / 212

•

FQXSPPW0061M: Sensor [SensorElementName] has transitioned to critical from a less severe

state.

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0522

User Action:

Complete the following steps to solve:

1. Ensure power supply unit meets the wattage and efficiency level in the system spec and matches

with supported list.

2. Check the event log in XClarity Controller (XCC)/CMM2 Web GUI to the detail information to reseat/

reinstall/upgrade the power supply unit.

3. If the problem still exists, please contact Lenovo Support

•

FQXSPPW0062M: Sensor [SensorElementName] has transitioned to critical from a less severe

state.

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0522

User Action:

Please replace the installed power supply unit which is supported in server proven plan. (https://static.
lenovo.com/us/en/serverproven/flex/8721_7893.shtml)

•

FQXSPPW0063M: Sensor [SensorElementName] has transitioned to critical from a less severe

state.

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Voltage
SNMP Trap ID: 1
CIM Prefix: PLAT CIM ID: 0522

User Action:

Complete the following steps:

1. If the specified sensor is Planar 3.3V or Planar 5V, replace the system board (trained technician only).

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 98 / 212

Search results

Summary of Contents for 7X16

Reviews: