Lenovo 7X16 Reference Download Page 97

Page: 97 / 212

•

FQXSPPW0035M: Numeric sensor [NumericSensorElementName] going low (lower critical) has

asserted.

This message is for the use case when an implementation has detected a Lower Critical sensor going low
has asserted.

Severity: Error
Serviceable: Yes
Automatically notify Support: Yes
Alert Category: Critical - Voltage
SNMP Trap ID: 1
CIM Prefix: PLAT CIM ID: 0480

User Action:

Complete the following steps:

1. If the specified sensor is Planar 3.3V or Planar 5V, (trained technician only) replace the system board.

2. If the specified sensor is Planar 12V, check the event log in XClarity Controller or CMM for power-

supply-related issues, and resolve those issues.

3. If the problem remains, (trained technician only) replace the system board.

•

FQXSPPW0047M: Numeric sensor [NumericSensorElementName] going high (upper critical) has

asserted.

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has asserted.

Severity: Error
Serviceable: Yes
Automatically notify Support: Yes
Alert Category: Critical - Voltage
SNMP Trap ID: 1
CIM Prefix: PLAT CIM ID: 0494

User Action:

Complete the following steps:

1. If the specified sensor is Planar 3.3V or Planar 5V, (trained technician only) replace the system board.

2. If the specified sensor is Planar 12V, check the event log in XClarity Controller and CMM2 for power-

supply-related issues, and resolve those issues.

3. If the problem remains, (trained technician only) replace the system board.

•

FQXSPPW0057J: Sensor [SensorElementName] has transitioned from normal to non-critical state.

This message is for the use case when an implementation has detected a Sensor transitioned to non-
critical from normal.

Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0520

User Action:

Please check event log in XClarity Controller and CMM2 web interface.

Chapter 2

XClarity Controller events

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 97 / 212

Search results

Summary of Contents for 7X16

Reviews: