Lenovo 7X16 Reference Download Page 47

Page: 47 / 212

Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0220

User Action:

Information only; no action is required.

•

FQXSPEM4029I: All PCIe slots on [arg1] may not be functional based upon your current CPU

population.

PCIe not be functional

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0221

User Action:

Information only; no action is required.

•

FQXSPEM4030I: A scheduled operation on the RAID controller has encountered an issue. Refer to

RAID Logs under Server Management, Local Storage, for details.([arg1],[arg2],[arg3],[arg4],[arg5])

The RAID controller has scheduled operation issue

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0223

User Action:

Information only; no action is required.

•

FQXSPFC4000I: The bare metal connection process has been started.

Bare Metal Connection process has been started

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0143

User Action:

Information only; no action is required.

•

FQXSPFC4001I: The bare metal update application reports a status of [arg1].

Bare Metal Update Application Status

Severity: Info
Serviceable: No
Automatically notify Support: No

Chapter 2

XClarity Controller events

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 47 / 212

Search results

Summary of Contents for 7X16

Reviews: