Lenovo 7X16 Reference Download Page 72

Page: 72 / 212

CIM Prefix: IMM CIM ID: 0068

User Action:

Information only; no action is required.

•

FQXSPNM4041I: Syslog port number changed from [arg1] to [arg2] by user [arg3].

A user has modified the Syslog receiver port number

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0069

User Action:

Information only; no action is required.

•

FQXSPNM4042I: Remote Presence port number changed from [arg1] to [arg2] by user [arg3].

A user has modified the Remote Presence port number

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0070

User Action:

Information only; no action is required.

•

FQXSPNM4043I: SMTP Server set by user [arg1] to [arg2]:[arg3].

A user configured the SMTP server

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0086

User Action:

Information only; no action is required.

•

FQXSPNM4044I: Telnet [arg1] by user [arg2].

A user enables or disables Telnet services

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0087

User Action:

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 72 / 212

Search results

Summary of Contents for 7X16

Reviews: