Lenovo 7X16 Reference Download Page 70

Page: 70 / 212

User Action:

Complete the following steps until the problem is solved:

1. Make sure that the XCC/BMC manegment network cable is connected and the network ports is

active.

2. Make sure that there is a DHCPv6 server on the network that can assign an IP address to the XCC/

BMC.

3. If problem persists, collect Service Data log.

4. Contact Lenovo Support.

•

FQXSPNM4033I: Telnet port number changed from [arg1] to [arg2] by user [arg3].

A user has modified the telnet port number

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0061

User Action:

Information only; no action is required.

•

FQXSPNM4034I: SSH port number changed from [arg1] to [arg2] by user [arg3].

A user has modified the SSH port number

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0062

User Action:

Information only; no action is required.

•

FQXSPNM4035I: Web-HTTP port number changed from [arg1] to [arg2] by user [arg3].

A user has modified the Web HTTP port number

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0063

User Action:

Information only; no action is required.

•

FQXSPNM4036I: Web-HTTPS port number changed from [arg1] to [arg2] by user [arg3].

A user has modified the Web HTTPS port number

Severity: Info
Serviceable: No

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 70 / 212

Search results

Summary of Contents for 7X16

Reviews: