Lenovo 7X16 Reference Download Page 190

Page: 190 / 212

Severity: Error

User Action:

1. Restart the system and retry the operation again.

2. If the problem persists, contact technical support.

•

FQXPMER0003I: RAID configuration cleared successfully

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMER0003M: Failed to erase internal storage drives

Severity: Error

User Action:

1. Ensure the proper connection of hard drives, backplane, and related cables.

2. Check if security function is enabled for the hard disk drives, if yes, disable that and retry the

operation.

3. Ensure device firmware is at the latest level.

4. Restart the system and retry the operation again.

5. If the problem persists, contact technical support.

•

FQXPMER0004I: Internal storage drives erased successfully

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMER0004M: Failed to clear system logs

Severity: Error

User Action:

1. Restart BMC via supported method and reboot the system.

2. Retry this operation again.

3. If the problem persists, contact technical support.

•

FQXPMER0005I: All system logs cleared successfully

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMER0005M: Failed to load UEFI factory default settings

Severity: Error

User Action:

1. Restart BMC via supported method and reboot the system.

2. Retry this operation again.

186

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 190 / 212

Search results

Summary of Contents for 7X16

Reviews: