Lenovo 7X16 Reference Download Page 55

Page: 55 / 212

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0230

User Action:

Information only; no action is required

•

FQXSPIO2007I: A PCI PERR recovery has occurred on system [ComputerSystemElementName].

This message is for the use case when an implementation has detected a PCI PERR recovered.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0233

User Action:

Information only; no action is required

•

FQXSPIO2008I: A PCI SERR on system [ComputerSystemElementName] has deasserted.

This message is for the use case when an implementation has detected a PCI SERR deassertion.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0235

User Action:

Information only; no action is required

•

FQXSPIO2010I: Bus [SensorElementName] has recovered from a Correctable Bus Error.

This message is for the use case when an implementation has detected that a system has recovered from
a Bus Correctable Error.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0239

User Action:

Information only; no action is required.

•

FQXSPIO2014I: Bus [SensorElementName] is no longer operating in a degraded state.

This message is for the use case when an implementation has detected a Bus is No Longer Degraded.

Severity: Info
Serviceable: No

Chapter 2

XClarity Controller events

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 55 / 212

Search results

Summary of Contents for 7X16

Reviews: