Lenovo 7X16 Reference Download Page 100

Page: 100 / 212

•

FQXSPPW0118J: The current chassis configuration is not supported for PMEM operation.

This message is for the use case when an implementation has detected the current chassis configuration
is not supported for PMEM operation.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0440

User Action:

Complete the following steps:

1. Check the PSU configuration in the chassis. https://lenovopress.com/lp1397 All the PSU in the

chassis must meet the latest chassis (8721) SPP list. https://static.lenovo.com/us/en/serverproven/
flex/8721_7893.shtml

2. If the issue persists, call Lenovo service for assistant

•

FQXSPPW0119J: Compute node has been gracefully shutdown while CMM is in failsafe mode with

PMEM ADR complete to prevent data lost.

This message is for the use case when an implementation has detected compute node has been
gracefully shutdown while CMM is in failsafe mode with PMEM ADR complete.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0440

User Action:

Information only; no action is required.

•

FQXSPPW0120J: Unsupported PSU configuration.CPU power has been capped to 125W.

This message is for the use case when an implementation has detected unsupported PSU configuration.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0440

User Action:

Complete the following steps:

1. Check the PSU configuration in the chassis. https://lenovopress.com/lp1397 All the PSU in the

chassis must meet the latest chassis (8721) SPP list. https://static.lenovo.com/us/en/serverproven/
flex/8721_7893.shtml

2. If the issue persists, call Lenovo service for assistant.

•

FQXSPPW0121I: There is potential for power capping when configuration exceeds maximum

power limit.

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 100 / 212

Search results

Summary of Contents for 7X16

Reviews: