manualshive.com logo in svg

Lenovo 7X16, Reference, Page: 18 / 212

Share
Download
Lenovo 7X16 Reference Download Page 18

Table 2. Events organized by severity (continued)

Event ID

Message String

Severity

FQXSPPU2002I

The Processor [ProcessorElementName] is no longer operating in a 
Degraded State.

Informational

FQXSPPU2007I

The System [ComputerSystemElementName] has detected a POST 
Error deassertion.

Informational

FQXSPPW0001I

[PowerSupplyElementName] has been added to container 
[PhysicalPackageElementName].

Informational

FQXSPPW0005I

[PowerSupplyElementName] is operating in an Input State that is out 
of range.

Informational

FQXSPPW0008I

[SensorElementName] has been turned off.

Informational

FQXSPPW0009I

[PowerSupplyElementName] has been Power Cycled.

Informational

FQXSPPW0121I

There is potential for power capping when configuration exceeds 
maximum power limit.

Informational

FQXSPPW2001I

[PowerSupplyElementName] has been removed from container 
[PhysicalPackageElementName].

Informational

FQXSPPW2002I

[PowerSupplyElementName] has returned to OK status.

Informational

FQXSPPW2003I

Failure no longer predicted on [PowerSupplyElementName].

Informational

FQXSPPW2006I

[PowerSupplyElementName] has returned to a Normal Input State.

Informational

FQXSPPW2007I

[PowerSupplyElementName] Configuration is OK.

Informational

FQXSPPW2008I

[PowerSupplyElementName] has been turned on.

Informational

FQXSPPW2018I

[PowerSupplyElementName] out-of-range has returned to a Normal 
Input State.

Informational

FQXSPPW2031I

Numeric sensor [NumericSensorElementName] going low (lower non- 
critical) has deasserted.

Informational

FQXSPPW2035I

Numeric sensor [NumericSensorElementName] going low (lower 
critical) has deasserted.

Informational

FQXSPPW2047I

Numeric sensor [NumericSensorElementName] going high (upper 
critical) has deasserted.

Informational

FQXSPPW2057I

Sensor [SensorElementName] has deasserted the transition from 
normal to non-critical state.

Informational

FQXSPPW2061I

Sensor [SensorElementName] has transitioned to a less severe state 
from critical.

Informational

FQXSPPW2062I

Sensor [SensorElementName] has transitioned to a less severe state 
from critical.

Informational

FQXSPPW2063I

Sensor [SensorElementName] has transitioned to a less severe state 
from critical.

Informational

FQXSPPW2079I

Sensor [SensorElementName] has deasserted the transition to non- 
recoverable.

Informational

FQXSPPW2101I

Redundancy Degraded for [RedundancySetElementName] has 
deasserted.

Informational

FQXSPPW2104I

Non-redundant:Sufficient Resources from Redundancy Degraded or 
Fully Redundant for [RedundancySetElementName] has deasserted.

Informational

14

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Reviews:

No comments