Lenovo 7X16 Reference Download Page 127

Page: 127 / 212

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0246

User Action:

Information only; no action is required.

•

FQXSPSE4048I: Role [arg1] is removed by user [arg2].

Role is removed

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0247

User Action:

Information only; no action is required.

•

FQXSPSE4049I: Role [arg1] is assigned to user [arg2] by user [arg3].

Role is assgned

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0248

User Action:

Information only; no action is required.

•

FQXSPSE4050I: [arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5].

This message is for the use case where IPMI command to be sent.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0251

User Action:

Information only; no action is required.

•

FQXSPSR2001I: Sensor [SensorElementName] has deasserted the transition to non-recoverable

from a less severe state.

This message is for the use case when an implementation has detected that the Sensor transition to non-
recoverable from less severe has deasserted.

Severity: Info

Chapter 2

XClarity Controller events

123

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 127 / 212

Search results

Summary of Contents for 7X16

Reviews: