Lenovo 7X16 Reference Download Page 66

Page: 66 / 212

Information only; no action is required.

•

FQXSPNM4016I: Domain name set to [arg1] by user [arg2].

Domain name set by user

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0043

User Action:

Information only; no action is required.

•

FQXSPNM4017I: Domain Source changed to [arg1] by user [arg2].

Domain source changed by user

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0044

User Action:

Information only; no action is required.

•

FQXSPNM4018I: DDNS setting changed to [arg1] by user [arg2].

DDNS setting changed by user

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0045

User Action:

Information only; no action is required.

•

FQXSPNM4019I: DDNS registration successful. The domain name is [arg1].

DDNS registation and values

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0046

User Action:

Information only; no action is required.

•

FQXSPNM4020I: IPv6 enabled by user [arg1] .

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 66 / 212

Search results

Summary of Contents for 7X16

Reviews: