Lenovo 7X16 Reference Download Page 86

Page: 86 / 212

Information only; no action is required.

•

FQXSPPP4028I: The server was automatically powered on because the power restore policy is set

to always restore..

Server was automatically powered on because the power restore policy is set to always restore.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0172

User Action:

Information only; no action is required.

•

FQXSPPP4029I: The server was automatically powered on because the power restore policy is set

to restore previous power state..

Server was automatically powered on because the power restore policy is set to restore previous power
state.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0173

User Action:

Information only; no action is required.

•

FQXSPPP4030I: The server was reset via Platform Event Filter.

Server was reset via Platform Event Filter

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0174

User Action:

Information only; no action is required.

•

FQXSPPP4031I: The server was power-cycled via Platform Event Filter.

Server was power-cycled via Platform Event Filter

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0175

User Action:

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 86 / 212

Search results

Summary of Contents for 7X16

Reviews: