Lenovo 7X16 Reference Download Page 128

Page: 128 / 212

Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Hard Disk drive
SNMP Trap ID: 5
CIM Prefix: PLAT CIM ID: 0525

User Action:

Information only; no action is required

•

FQXSPSS4000I: Management Controller Test Alert Generated by [arg1].

This message is for the use case where a user has generated a Test Alert.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0040

User Action:

Information only; no action is required.

•

FQXSPSS4001I: Server General Settings set by user [arg1]: Name=[arg2], Contact=[arg3],

Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-position=[arg7], Address=[arg8].

A user configured the Location setting

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0080

User Action:

Information only; no action is required.

•

FQXSPSS4002I: License key for [arg1] added by user [arg2].

A user installs License Key

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0096

User Action:

Information only; no action is required.

•

FQXSPSS4003I: License key for [arg1] removed by user [arg2].

A user removes a License Key

Severity: Info
Serviceable: No
Automatically notify Support: No

124

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 128 / 212

Search results

Summary of Contents for 7X16

Reviews: