Lenovo 7X16 Reference Download Page 175

Page: 175 / 212

User Action:

Complete the following steps:

1. Reboot the system.

2. If the error recurs TPM related features will not work.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU4038I: TPM Firmware recovery successful.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4040M: TPM selftest has failed.

Severity: Warning

User Action:

Complete the following steps:

1. Reboot the system.

2. If the error recurs TPM related features will not work.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU4041I: TPM Firmware update is in progress. Please DO NOT power off or reset system.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4042I: TPM Firmware update is finished, rebooting system to take effect.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4043G: TPM Firmware update aborted. System is rebooting...

Severity: Warning

User Action:

Information only; no action is required.

•

FQXSFPU4044I: The current TPM firmware version could not support TPM version toggling.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4046I: TPM Firmware will be updated from TPM1.2 to TPM2.0.

Severity: Info

User Action:

Chapter 3

UEFI events

171

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 175 / 212

Search results

Summary of Contents for 7X16

Reviews: