Lenovo 7X16 Reference Download Page 16

Page: 16 / 212

Table 2. Events organized by severity (continued)

Event ID

Message String

Severity

FQXSPOS4000I

OS Watchdog response [arg1] by [arg2] .

Informational

FQXSPOS4001I

Watchdog [arg1] Screen Capture Occurred .

Informational

FQXSPOS4004I

Operating System status has changed to [arg1].

Informational

FQXSPOS4005I

Host Power-On password changed.

Informational

FQXSPOS4006I

Host Power-On password cleared.

Informational

FQXSPOS4007I

Host Admin password changed.

Informational

FQXSPOS4008I

Host Admin password cleared.

Informational

FQXSPOS4009I

OS Crash Video Captured.

Informational

FQXSPPP4000I

Attempting to [arg1] server [arg2] by user [arg3].

Informational

FQXSPPP4001I

Server Power Off Delay set to [arg1] by user [arg2].

Informational

FQXSPPP4002I

Server [arg1] scheduled for [arg2] at [arg3] by user [arg4].

Informational

FQXSPPP4003I

Server [arg1] scheduled for every [arg2] at [arg3] by user [arg4].

Informational

FQXSPPP4004I

Server [arg1] [arg2] cleared by user [arg3].

Informational

FQXSPPP4005I

The power cap value changed from [arg1] watts to [arg2] watts by
user [arg3].

Informational

FQXSPPP4006I

The minimum power cap value changed from [arg1] watts to [arg2]
watts.

Informational

FQXSPPP4007I

The maximum power cap value changed from [arg1] watts to [arg2]
watts.

Informational

FQXSPPP4008I

The soft minimum power cap value changed from [arg1] watts to
[arg2] watts.

Informational

FQXSPPP4011I

Power capping was activated by user [arg1].

Informational

FQXSPPP4012I

Power capping was deactivated by user [arg1].

Informational

FQXSPPP4013I

Static Power Savings mode has been turned on by user [arg1].

Informational

FQXSPPP4014I

Static Power Savings mode has been turned off by user [arg1].

Informational

FQXSPPP4015I

Dynamic Power Savings mode has been turned on by user [arg1].

Informational

FQXSPPP4016I

Dynamic Power Savings mode has been turned off by user [arg1].

Informational

FQXSPPP4017I

Power cap and external throttling occurred.

Informational

FQXSPPP4018I

External throttling occurred .

Informational

FQXSPPP4019I

Power cap throttling occurred.

Informational

FQXSPPP4020I

The measured power value has returned below the power cap value.

Informational

FQXSPPP4021I

The new minimum power cap value has returned below the power cap
value.

Informational

FQXSPPP4022I

The server was restarted for an unknown reason.

Informational

FQXSPPP4023I

The server is restarted by chassis control command.

Informational

FQXSPPP4024I

The server was reset via push button.

Informational

ThinkSystem SN550 V2 Messages and Codes Reference

Summary of Contents for 7X16





















































































































































































































Search results

Summary of Contents for 7X16

Reviews:

Lenovo 7X16, Reference, Page: 16 / 212

Search results

Summary of Contents for 7X16

Reviews: