Lancellotti MAESTRO, Instructions For The User

Page: 372 / 408

Instructions for the user
372
11.5 Pan recognition
An electronic sensor detects if a pan is
present
or
absent
on the radiant element. If the type of pan
is
unsuitable
for magnetic induction cooking (see section “ 11.5.1”) or if the pan is
too small
(see
table “
MINIMUM DIAMETER
” on p. 372), the adjacent symbol is displayed.
If during cooking a pan is
removed
from the radiant element
without
having first returned the
relative knob to “
0
” position, the power value, previously set and shown on the relative display, will
be automatically
replaced
with the symbol .
If the pan is
repositioned
correctly on the radiant element, the symbol switches off and cooking
will resume normally; otherwise,
after 10 minutes
, the symbol will switch off, the knob will have to
be returned to “
0
” position and a new power value set before the radiant element can be used
again.
If a knob is turned to any position
before
placing a pan on the radiant element, the relative display
shows the set power value and then immediately
replaces
it with the symbol (the radiant element
stands by for
10 minutes
). If in the meantime a pan is placed correctly on the radiant element,
cooking will begin; otherwise the radiant element does not activate and symbol switches off. To
reactivate the radiant element, the relative knob must be returned to “
0
” position and a new power
value set.
Pan recognition limits:
the diameter of the pan base is signalled by a circumference or perimeter
on the cooking zone.
1
Ø 145
2
Ø 180
3
Ø 260
4
Ø 210
5
Ø 200
6
Ø 230
7
220
MINIMUM
DIAMETER
(mm)
120 145 180 145 145 180 145