Lancellotti MAESTRO, Instructions For The User, Page: 357 / 408

Instructions for the user
357
ADJUSTING THE VOLUME OF THE BELL
The volume of the bell can be varied (on 3 levels) while it is operating by pressing button .
DEACTIVATING THE BELL
The bell automatically stops ringing after
seven minutes
. It is possible to deactivate it manually by
pressing button .
After pressing button the oven begins to operate once again: to switch it off, turn the function
switch knob and the thermostat knob to “ 0 ”.
It is also possible to deactivate the bell by pressing any one of the function buttons. The oven
switches off regardless of the function or set temperature and the
AUTO
symbol flashes. To stop
the
AUTO
symbol flashing, press button , turn the function selector switch and thermostat to "
0
".
TIMER
The end of cooking display can also be used as a simple timer.
Using the display as a timer does not interrupt the operation of the oven at the end of the set time.
Press button and the display shows the figures ; hold down and press at the same time
the value variation buttons or . Release the button to begin the programmed count and the
display shows symbols and .
After programming the timer, the display once more shows the current time. To display the time
remaining, press button
.
Setting inconsistent values is logically prevented (e.g. the end of cooking display does not accept a
contrast between an end of cooking time and a longer cooking time).
DELETING SET DATA
With the program set, hold down the button of the function you wish to delete while at the same
time reaching value
with the value variation buttons or . Deleting the cooking time is
interpreted by the display as the end of the cooking.
MODIFYING SET DATA
The data set for cooking can be modified at any moment by holding down the button of the function
and at the same time pressing the value variation buttons or .