Lancellotti MAESTRO, Instructions For The User, Page: 334 / 408

Instructions for the installer
334
3.4 Fitting the front profile
A front profile is supplied for the
Genesi
series models to complement the aesthetic line.
Proceed as follows to install:
•
approach profile
A
to the assembly seat as shown in detail in drawing
1
;
•
fit the profile until it comes into contact with the assembly seat, pushing it downwards so that it
couples with blocks
B
on each end of the cooker (detailed drawing
2
).
3.5 Fitting the splash guard (optional)
The splash guard must not be used in combination with the stainless steel splashback.
Proceed as follows to install:
•
rest the splash guard
A
on the back of the surface, making sure the holes are aligned.
•
tighten the screws
B
using a Phillips screwdriver.
Any yellowing of the steel over time, which is completely natural, in no way alters its original
characteristics. It can be removed using specific steel cleaning products.