Lancellotti MAESTRO, Instructions For The User

Page: 378 / 408

Instructions for the user
378
FAULT CAUSE REMEDY
The hob or the cooking
zones do not switch on.
The appliance is not correctly connected to the
mains.
The hob lock function has been activated.
Reconnect the appliance to the mains.
Deactivate the lock by following the instructions in
section 11.9
The display shows the
adjacent symbol.
There is no pan on the cooking zone.
The pan is not suitable for magnetic induction
cooking.
The diameter of the base of the pan is too small
for the cooking zone.
Correctly position a suitable pan by following the
instructions in section 11.5
Replace the pan with a suitable one, as indicated in
section 11.5
Replace the pan with a suitable one, as indicated in
section 11.5
The display shows the
adjacent symbol.
The knob is not positioned correctly.
It is not necessary to call Customer Service;
to
restore the radiant element, simply return the knob to
position “
0
” and reset the required power value.
The display shows the
adjacent code
alternated with
numbers or letters.
Contact
Customer Service
and give the
code
shown
on the display.
The hob or a cooking zone
switches off.
The safety device has triggered. The device
triggers when a cooking zone is left on by mistake.
An empty pan has overheated.
Return the relative knob to “
0
” position.
Remove the empty pan from the cooking zone.
The cooling fan stays on
after the hob is switched off.
This is not a fault. The fan stays on until the hob has cooled down. The
fan will switch off
automatically
.