LaCie Ethernet Disk RAID
(Firmware version 1.4)
User Manual
page
Managing Your Ethernet Disk RAID
5.6.4. Deleting a Client
■
If you remove the Windows Backup Software soft-
ware from a particular computer, or if you change the
computer name, the original computer name remains on
the Ethernet Disk RAID and counts toward the total
number of computers that are allowed to back up to the
Ethernet Disk RAID. To both delete all backups of all
disks for a particular computer and the computer name,
you must delete the client.
To delete a client:
In the navigation bar, click
Backups
.
Select the radio button to the left of the computer
whose backups and computer name you want to de-
lete from the Ethernet Disk RAID (in the first Se-
lect column).
Click
Delete Client
.
When prompted to confirm the deletion, click
OK
.
All backups of all disks associated with this com-
puter are deleted, and the computer name is also deleted
from the Ethernet Disk RAID.
1.
2.
3.
4.
TeChNICAl NOTe:
If you delete a client
and the user did not previously remove protec-
tion for that disk, when the user subsequently ac-
cesses the Windows Backup Software software,
the Status page will indicate that the backup of
the protected disk is offline. To back up the disk
once again, the user must remove protection and
then protect the disk again. For more informa-
tion, refer to section
7.9.5. Removing Protection
and section
7.2. Protecting Your Disks
.
