LaCie Ethernet Disk RAID
(Firmware version 1.4)
User Manual
page
Managing Your Ethernet Disk RAID
5.6.3. Deleting a Backup
■
You can delete all backups of a given disk, but you
cannot delete just an individual backup from a specific
date and time.
ImpOrTANT INfO:
If you delete all back-
ups of all disks for a particular computer, that
computer no longer appears on the Backups
page. However, that computer name remains in
the Ethernet Disk RAID and counts toward the
total number of computers that are allowed to
back up to the Ethernet Disk RAID. If you want
to delete all backups of all disks and the computer
name, refer to section
5.6.4. Deleting a Client
.
To delete all backups of a disk:
In the navigation bar, click
Backups
.
Select the radio button adjacent to the disk whose
backups you want to delete (in the second
Select
column).
Click
Delete Backup
.
When prompted to confirm the deletion, click
OK
.
The disk no longer appears on the
Backups
page,
and all backup versions are deleted.
If only one disk was protected, the computer name
disappears from the page as well.
1.
2.
3.
4.
TeChNICAl NOTe:
If you delete a backup
and the user did not previously remove protection
for that disk, when the user subsequently accesses
Client Backup and Recovery, the Status page will
indicate that the backup of the protected disk is
offline. To back up the disk once again, the user
must remove protection and then protect the
disk again. For more information, refer to section
7.9.5. Removing Protection
and section
7.2. Pro-
tecting Your Disks
.
