LaCie Ethernet Disk RAIDNetwork RAID Storage... User Manual Download Page 58

Page: 58 / 140

LaCie Ethernet Disk RAID

(Firmware version 1.4)

User Manual

page

Managing Your Ethernet Disk RAID

Fig. 5.7.3.

TeChNICAl NOTe:

If you inadvertently

disconnect a USB device, unplug it from the

Ethernet Disk RAID, plug it back in, and then

click

Scan

. This reactivates the USB device. User

assignments are always retained.

The USB page displays a list of all USB devices that

are currently attached to the Ethernet Disk RAID. USB

disks are identified by the names usbdisk1 and usbdisk2.

(These names cannot be changed.)

To unplug a USB device from the Ethernet Disk

RAID, you must first use the Manager to disconnect it.

To disconnect a USB device:

In the navigation bar, click

Advanced

In the left pane, click

USB.

In the list of USB devices, select the device(s) that

you want to disconnect.

Click

Disconnect

When the confirmation message appears, click

You can now unplug the USB device.

5.7.3. USB

■

Summary of Contents for Ethernet Disk RAIDNetwork RAID Storage...













































































































































Search results

Summary of Contents for Ethernet Disk RAIDNetwork RAID Storage...

Reviews:

Related manuals for Ethernet Disk RAIDNetwork RAID Storage...

Brands by name

Popular brands

LaCie Ethernet Disk RAIDNetwork RAID Storage..., User Manual

Search results

Summary of Contents for Ethernet Disk RAIDNetwork RAID Storage...

Reviews:

Related manuals for Ethernet Disk RAIDNetwork RAID Storage...

Brands by name

Popular brands