LaCie Ethernet Disk RAID
(Firmware version 1.4)
User Manual
page
Protecting Local Disks
7.5. Changing the Backup Schedule
When you protect a disk, you specify when you want
backups to occur. However, you can change this sched-
ule at any time as long as the Status page indicates that
the Status is Normal. If protection is stopped (for ex-
ample, if you recovered the disk or recovered a different
partition on the same disk), you cannot change the disk
schedule until you resume protection by clicking
Back
Up Now
.
To change the backup schedule:
Click
Schedule
.
In the
Protected disk
list, select the disk whose
backup schedule you want to change.
Specify when you want backups to occur.
For example, if you want backups to occur every
day, select
Daily
from the
Recurrence
list. If you
want backups to occur once a week, select the day
of the week from the
Recurrence
list. Then select
the time.
If you don’t want backups to occur automatically, se-
lect
Not Scheduled
from the
Recurrence
list. (The
Time
list appears dimmed.) Backups will occur only
when you start one manually (as described in section
7.3. Manually Backing Up Your Disk
).
Click
Apply
.
The schedule change takes effect immediately, and
the date and time of the next scheduled backup ap-
pears in the
Next
backup
area.
1.
2.
3.
4.
Fig. 7.5.
