background image

LaCie Ethernet Disk RAID 

(Firmware version 1.4)

User Manual

page 

Protecting Local Disks

10.  Click 

Restore

 

The 

Protected disk

 list displays the disk or parti-

tion that you are currently booting from. See Fig. 

7.9.3.1-A.

Fig. 7.9.4.A

11.  In the 

Backups

 list, select the most recent backup. 

You cannot recover any backup except the most 

recent one.

TeChNICAl NOTe:

 If no backups appear in 

this list, the backup that you booted from is not 

using the same recovery password as the Ethernet 

Disk RAID. This can occur if you changed the 

recovery password on the Ethernet Disk RAID 

before booting remotely, or if you changed it be-

tween backups in Windows Backup Software and 

booted from an earlier backup. To resolve this is-

sue, you must reset the password in the Microsoft 

iSCSI Initiator* (as described in section

 8.4. Re-

setting the Recovery Password in the Microsoft 

iSCSI Initiator

). Then restart Windows Backup 

Summary of Contents for Ethernet Disk RAIDNetwork RAID Storage...













































































































































Reviews: