Kverneland Exacta-TL-GEOSPREAD GS3 Operator'S Manual Download Page 88

Page: 88 / 171

To be done before spreading

Position of the border

spreading plate

Mount the border spreading plate on another position when using the
border spreading plate and the set of vanes 330-330-330 (option).

For this purpose, a plate is supplied with the set of vanes 330-330-
330.



Switch the tractor off and remove the key from the ignition and
engage the parking brake of the tractor.



Mount the plate according to the supplied assembly instructions.



Then follow the instructions»Operation« on page 80

CAREFUL

Mount the border spreading plate back into its original position if you
are going to spread again with the standard set of vanes 285-285-285.

Summary of Contents for Exacta-TL-GEOSPREAD GS3












































































































































































Search results

Summary of Contents for Exacta-TL-GEOSPREAD GS3

Reviews:

Brands by name

Popular brands

Kverneland Exacta-TL-GEOSPREAD GS3, Operator'S Manual

Search results

Summary of Contents for Exacta-TL-GEOSPREAD GS3

Reviews:

Brands by name

Popular brands