Kverneland Exacta-TL-GEOSPREAD GS3, Operator'S Manual

Page: 3 / 171

Table of contents
3
Table of contents
Preface ....................................................... 4
Target group of this manual 4
Meaning of symbols 5
Safety ......................................................... 7
For your safety 7
Other guidelines 7
Safety labels 8
Safety requirements 10
Getting familiar with the machine ........... 23
Applications of the machine 23
CentreFlow spreading system 23
Adjust carefully 24
Spreading pattern 28
The ISO control system 30
Technical specifications 36
Technical specifications 37
Before first use ......................................... 38
Inspection of the supplied machine 38
Mounting instructions 38
Tractor provisions 50
Mounting the coupling shaft 51
Connecting to the tractor ......................... 53
Selecting linkage pin height 54
Connecting the machine 55
To be done before spreading .................. 59
Find the correct settings of the spreader
and set it accordingly
59
Setting the spreader 64
Working width 66
Inclination 67
PTO shaft rpm 67
Application rate 68
Filling 75
Spreading pattern check (tray test) 78
Driving on the road ................................... 97
Before taking to the road 97
Preparing the machine to be transported 98
Use in the field .......................................... 99
Adjusting the machine 100
Spreading on field 102
Start spreading 105
Border spreading 111
Stopping work 118
Failure and stoppage 119
Rangement de la machine ....................... 123
Storing the machine ................................. 124
Cleaning 124
Disconnecting the machine 125
Maintenance .............................................. 128
Oil and grease content 130
Maintenance intervals 131
Lubricating points 132
Applying or adding grease 133
Apply oil 134
Torques in ft.lb 135
Stainless steel tightening torques ft.lb 137
Stainless steel tightening torques (Nm) 138
Checking the hydraulic system
139
Checking and setting the dosing
mechanism
141
Checking and setting the discharge point
setting mechanism
144
Checking and setting the discharge bush
height
146
Replacing agitator axle seal 148
Accessories ............................................... 150
Troubleshooting ........................................ 160
Troubleshooting table 160
Falling into disuse ..................................... 163
Liability ....................................................... 164
Liability 164
Complaints 165
Warranty 165
Notes .......................................................... 166
Index ........................................................... 167