manualshive.com logo in svg

Kverneland Exacta-TL-GEOSPREAD GS3, Operator'S Manual

Share
Download
Kverneland Exacta-TL-GEOSPREAD GS3 Operator'S Manual Download Page 11

Safety

11

Authorization

Only to be used by an authorized person

The machine may be used by authorized people only. A person is 
authorized if he/she:

•

received training as required by the national authorities,

•

has taken responsibility as described in 

paragraph »Person« on page 10.

Maintenance and repairs by experts

Maintenance, replacement of parts and repairs to the machine may 
only be performed by experts.
A person is considered to be an expert if he/she has sufficient 
knowledge in the fields of safety, maintenance, production and repairs 
as a result of training and experience.
Maintenance or repairs performed by a person who is not so qualified 
could lead to injury and damage to the machine.

Clothes/protection

Wear close-fitting clothing

Avoid wearing loose fitting clothing. Loose clothing could become 
entangled with moving parts, which could lead to serious 
consequences.

Ensure personal protection

Ensure your personal protection. Outfit:

•

safety goggles,

•

safety shoes,

•

safety gloves.

Prevent hearing damage

Your hearing could be damaged when working with the tractor and 
machine with noise levels in excess of 80 dB. Use the appropriate ear 
protection in order to prevent hearing damage. Remaining in an area 
with high noise levels for a long period of time could lead to serious 
damage to your hearing.

What to do in the event of injury

In the event of injury and if you suspect that you made contact with 
materials you should:

•

clean the point of contact with a lot of water,

•

contact your physician immediately!

\ 

Summary of Contents for Exacta-TL-GEOSPREAD GS3












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands