Before first use
41
IsoMatch terminal on an ISO
tractor
If you use the IsoMatch control box with a tractor manufactured with
the ISOBUS communication system, you can connect it with the
supplied 7-pin CAN cable to a standard tractor CAN connection.
Connect the side of the cable to which 1 plug is attached to the
tractor CAN connection.
Connect the side of the cable to which 2 plugs are attached to
control box connections.
IsoMatch terminal on a
NON-ISO tractor
If you use the IsoMatch control box with a tractor that is not equipped
with the ISOBUS communication system, an extra cable set is
needed. This cable set is included in the order or can be supplied via
your dealer.
With the non-ISO adaptor cable set, you can equip any tractor type
with a full ISOBUS communication system.
The fixing materials and the assembly instructions are delivered with
the IsoMatch control box.
See also paragraph »IsoMatch universal ISOBUS terminal« on
page 33 and the description on page 150.
Connect the cables so that you can work safely.
GPS signal for
GEOCONTROL
f you want to use the GEOCONTROL functionality, you should use a
localisation system on the tractor. If you mount a separate GPS re-
ceiver on the tractor, you should connect the plug to the rear on the
control box.
See also the user's manual of the
•
ISO control box,
•
the software,
•
tractor,
•
and GPS.
Summary of Contents for Exacta-TL-GEOSPREAD GS3
Page 6: ...Preface 6 ...
Page 166: ...Notes 166 Notes ...
