Maintenance
128
Maintenance
\
WARNING
Repair damage safely and without delay
Repair the machine safely before you continue with work:
•
place the tractor and machine on a firm, straight surface,
•
switch off the PTO shaft,
•
switch off the electronic control system,
•
release the pressure from the hydraulic system,
•
place all controls in their neutral or park position.
•
switch off the tractor,
•
remove the key from the ignition,
•
engage the parking brake of the tractor,
•
disconnect the tractor if possible,
•
wait until all parts have stopped moving. The mass (inertia)
could keep the machine running for a bit!
•
place wheel chocks in front of the wheels of a machine with
parking wheels to prevent it from rolling away,
•
wear protective clothing, such as safety gloves and shoes,
•
carefully follow the instructions given,
•
use the correct tools,
•
bigger or heavier parts must be locked and secured to lifting
gear when being replaced,
•
parts that could move unintentionally must be supported and
secured,
•
do not climb on parts of the machine that are not in use.
Only use stepladders, ladders or other tools intended for this
purpose.
•
disconnect the feed while working on the electric system.
•
disconnect the cables from the battery and the dynamo before
arc welding on the tractor or the connected machine!
Performed by an authorized person
Always have an authorized expert perform maintenance and
repairs as prescribed in, as prescribed in
paragraph »Authorization« on page 11.
All forms of responsibility of the manufacturer become null and
void and the warranty lapses if maintenance and repair work are
performed by an unauthorized person.
Summary of Contents for Exacta-TL-GEOSPREAD GS3
Page 6: ...Preface 6 ...
Page 166: ...Notes 166 Notes ...
