To be done before spreading
63
Online spreading chart
service
Information about the settings for the spreader can be found in the
spreading chart book, as well as on the online spreading chart service.
This will also provide information about additional types of fertilizer
that have been tested recently.
You can make use of the online spreading chart service as an
alternative to the spreading chart book. You must enter the
characteristics of the fertilizer, your working width, application rate,
driving speed and the type of fertilizer. You will then receive advice
from the website for setting your spreader: dosing setting, discharge
point, flowrate and angle of the spreader.
Procedures for adjusting the spreader can be found at:
chapter »Setting the spreader« on page 64.
Also check the advice given on the online spreading chart service.
Do a calibration test to check the dosing setting. Then check the
spreading pattern with a tray test.
See paragraph »Spreading pattern check (tray test)« on page 78.
You can reach the spreading chart service as follows:
Go to the website of Kverneland group:
http://www.Kvernelandspreadingcharts.com.
The various languages are given at the top of the page.
Start the spreading chart service and complete the details
required.
The spreading chart service will then request that you select a
product with comparable characteristics.
The spreading chart service will then indicate the settings for your
spreader. Follow the procedures as described in
paragraph »Setting the spreader« on page 64.
AutosetApp
AutosetApp gives you the option to download these spreading charts
to the IsoMatch Tellus terminal in order to set the spreader
automatically. After choosing the desired fertiliser type, the working
width, application rate, driving speed, dosing and discharge opening
are transmitted to the spreader using the AutosetApp. The spreader
then automatically gets the correct setting. Automatic adjustment of
the discharge point applies only to GEOSPREAD spreaders. The
same data may be transmitted to the spreader via the AutosetApp for
the other weighing spreader models such as Exacta-CL EW and
Exacta-TL(X). Except for the discharge opening, the spreader then
has to be set manually.
Telephone App
Using the Kverneland group spreading charts application, you can
easily find the right settings for your spreader.
The spreading charts application gives you immediate access to the
most up-to-date test results of fertiliser.
In just a few steps, the application will lead you to the correct settings
for your spreader, anytime of the day, wherever you want for almost
any type of fertiliser.
The spreading chart application (App) can be downloaded free of
charge through the Apple App Store and/or through the Google Play
Store.
Summary of Contents for Exacta-TL-GEOSPREAD GS3
Page 6: ...Preface 6 ...
Page 166: ...Notes 166 Notes ...
