Kontron FlexPAC, Manual

Page: 85 / 137

How to Use the CD-ROM
The following section explains the main features on the CD-ROM, how to
load and remove a CD-ROM disk and manually ejecting a CD. The CD-ROM
has the following features:
■
Eject Button - The rectangular shaped button is used to eject the CD tray
out from the CD-ROM.
■
Status LED - The status LED illuminates to notify you that the power is
“On” and that the system is busy accessing the CD.
■
Manual Eject Hole - Use this tiny emergency hole during a mechanical
or power failure to manually eject the CD tray out from the CD-ROM.
Loading and Removing a CD-ROM Disk
Use the following procedure to load and remove a CD from the CD-ROM.
Place the keyboard to the side when operating the CD-ROM. If it is not
moved, it can interfere with the ejection of the loading tray.
WARNING: Use care when handling the CD as you can easily scratch the
surface and destroy the data. Hold the CD around the outer
edge or by the center hub.
1. Push in the “Eject” button located on the front panel of the CD-ROM and
the loading tray will eject out (see Figures 4.3 and 4.5, Item 5).
2. Carefully place the CD onto the center hub of the loading tray. Gently
press downwards until it snaps securely in place on the spindle (see
Figure 4.4). Push the loading tray back into place in the CD-ROM.
3. To remove the CD, push in the “Eject” button and the loading tray will
eject back out. Carefully remove the CD from the spindle and push the
loading tray back into place. Store the CD in it’s protective case when not
in use.
NOTE: If your FlexPAC is equipped with an optional CD-RW drive,
software is supplied to facilitate CD burning.
4
■
Display & Drives
4.6