Kontron FlexPAC, Manual

Page: 54 / 137

Standard CMOS Setup
The “Standard CMOS Setup” menu allows you to record the basic hardware
configurations in your computer system, set the system clock and set any error
handling options. Since the system board is already installed in a working
system, there should be no need to select this category. You should only select
this category if you want to change your system hardware configurations, the
on board battery fails or if the settings stored in the CMOS memory gets lost
or damaged.
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
Date (mm:dd:yy) : Tue Mar 26 2001
Item Help
Time (hh:mm:ss) : 00 : 00 : 00
Menu Help
IDE Primary Master : Auto Detect Change the day, month
IDE Primary Slave : Auto Detect year and century
IDE Secondary Master : Auto Detect
IDE Secondary Slave : Auto Detect
Drive A : 1.44M, 3.5 in.
Drive B : None
Video : EGA/VGA
Halt On : All Errors
Base Memory : 640K
Extended Memory : Auto Detect
Total Memory : Auto Detect
The “control keys” for this menu are listed at the bottom of the menu. If you
need help in any option field, you can press the <F1> key. It will display
relevant information to help you with the selected option. The memory
display in the lower right-hand side of the menu is read-only. It will adjust
automatically according to when the memory changes. Each item on this
menu will be explained on the following pages.
3
■
Configuration
3.6