Kontron FlexPAC, Manual

Page: 72 / 137

Modem Use IRQ
This option names the interrupt request (IRQ) line assigned to the modem (if
any) on your system. Activity of the selected IRQ always awakens the system.
Suspend Mode
When enabled, and after the set time of system inactivity, all devices except
the CPU is shut “Off.”
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk drive
is powered down while all other devices remain active.
Soft-Off by PWRBTN
This field defines the power-off mode when using an ATX power supply. The
Instant Off mode allows powering off immediately upon pressing the power
button. In the Delay 4 Sec mode, the system powers off when the power button is
press for more than four seconds or enters the suspend mode when pressed for
less than 4 seconds.
CPU THRM-Throttling (for 3GHz FlexPAC Only)
When the system enters Doze mode, the CPU clock runs only part of the time.
You may select the percent of that the clock runs.
Power On By Ring
This option enables or disables the power-on function of the system through
the modem connected to the serial port or LAN.
Wake Up By PCI Card
This option activates the wake up function through a PCI card.
Resume By Alarm
This option enables or disables the resumption of the system operation. It
allows the system to be turned “On” automatically through the timer set in the
BIOS to make it a more scheduled type system. When enabled, the user is
allowed to set the Date and Time.
Date of Month Alarm
This option sets the “Date of Month Alarm” function.
3
■
Configuration
3.24