Kontron FlexPAC, Manual

Page: 114 / 137

Description Test Point
Test Keyboard Command Byte 33H
Test, Blank and Count All RAM 34H
Protected Mode Entered Safely (2) 35H
RAM Test Complete 36H
Protected Mode Exit Successful 37H
Update Keyboard, Output Port to Disable Gate A20 38H
Setup Cache Controller 39H
Test if 18.2Hz Periodic Working 3AH
Initialize BIOS Data Area at 40:0 3BH
Initialize the Hardware Interrupt Vector Table 3CH
Search and Initialize the Mouse 3DH
Update NumLock Status 3EH
OEM Initialization of COM and LPT Ports 3FH
OEM Initialization of COM and LPT Ports 40H
Initialize the Floppies 41H
Initialize the Hard Disk 42H
OEM’s Initialization of Power Management with USB 43H
Initialize Additional ROMs 44H
Update NumLock Status 45H
Test for Co-Processor Installed 46H
OEM’s Initialization of Power Management (check SMI) 47H
OEM Functions Before Boot (PCMCIA, Cardbus) 48H
Dispatch to Operation System Boot 49H
Jump Into Bootstrap Code 4AH
HPM Reboot Call 60H
HPM Initialization Call 61H
HPM Screen Enable Call 62H
HPM End of POST Call 63H
Decompress SBOOT.ROM 64H
Display Logo on Screen 65H
Restore Screen 66H
6
■
Maintenance & Troubleshooting
6.13