Kontron FlexPAC, Manual

Page: 56 / 137

Primary/Secondary Master and Slave
The on board PCI IDE connectors provide Primary and Secondary channels
for connecting up to four IDE hard disk drives or other IDE devices. Each
channel can support up to two hard disk drives; the first is the “Master” and
the second is the “Slave.”
Press <Enter> to configure the hard disk drive. The options include Auto,
Manual and None. Select “Manual” to manually define the drive information.
You will be asked to enter the following items.
CYLS: Number of cylinders
HEAD: Number of read/write heads
PRECOMP: Write pre-compensation
LANDZ: Landing zone
SECTOR: Number of sectors per track
MODE: Auto
Normal HDD < 528MB
Large
For MS-DOS only
LBA HDD > 528MB
(and supports Logical Block Addressing)
Drive A/Drive B
Drive A and Drive B are categories that identify the type(s) of floppy disk
drive(s) installed in the FlexPAC.
3
■
Configuration
3.8