Kontron FlexPAC, Manual

Page: 118 / 137

Troubleshooting Guide
If no errors are reported by the BIOS, but the system still fails to operate
properly, use the following guide to troubleshoot your system. The
information is provided as typical symptoms and possible solutions.
We recommend removing any PC cards and/or add-in cards from your system
during the initial troubleshooting procedures. You may then re-install the
cards one at a time and repeat the troubleshooting procedures to try and
isolate the problem to a particular card.
See Chapter 5, “Expanding the FlexPAC” for useful information on the
installation and removal of the PC cards and add-in cards.
System Fails to Power Up
If the system fails to power up and the power LED indicator does not
illuminate, check the following items.
• Is the power cord properly plugged into it’s power receptacle and is the
other end plugged into a grounded power source?
• Is the FlexPAC plugged into a switched, multiple outlet box? Is the switch
on the outlet box turned “On?” Is the power switch turned “On?”
• If applicable, is the external monitor (CRT) turned “On?”
• Is the AC outlet working? Plug a different electrical device into the outlet
to make sure it’s in working order.
6
■
Maintenance & Troubleshooting
6.17