Kontron FlexPAC, Manual

Page: 53 / 137

■
Standard CMOS Setup - This “Setup” screen contains the basic hardware configurations
needed to set up a working system.
■
Advanced BIOS Features - This “Setup” screen contains options to improve your
system and set up the special enhanced features.
■ Advanced Chipset Features - This “Setup” screen sets all the featured functions of
the chipset.
■
Integrated Peripherals - This “Setup” screen sets all the options of the IDE hard drive
and programmed input/output features.
■
Power Management Setup - This “Setup” screen configures the power saving functions.
■
PnP/PCI Configurations - This “Setup” screen configures the settings for the PnP/PCI
bus system.
■
PC Health Status - This “Setup” screen configures the parameters which determines
the health status of the PC.
■ Frequency/Voltage Control - This “Setup” screen configures the processor settings.
■
Load Fail-Safe Defaults - The BIOS defaults have been set by the manufacturer and
represent settings which provide minimum requirements for the system to operate.
■
Load Optimized Defaults - The chipset defaults are settings which provide for
maximum system performance.
■
Set Supervisor Password - This option is used to set the password which protects
the system and the “Setup” utility.
■
Set User Password - This option sets the password that will be used exclusively
for the system only.
■ Save & Exit Setup - Saves CMOS value changes to CMOS and exits “Setup.”
■
Exit Without Saving - Abandons all the CMOS changes and exits “Setup.”
3
■
Configuration
3.5