Kontron FlexPAC, Manual

Page: 74 / 137

PnP/PCI Configuration
This “Setup” screen contains the options for configuring the Personal
Computer Interconnect (PCI) bus system. The PCI system allows I/O devices
to operate at speeds almost the same as the CPU speed when the CPU is
communicating with it’s own special components. All PCI bus systems on the
computer use the INT#, thus all installed PCI cards must be set to this value.
WARNING: This section describes some very technical information and it is
strongly recommended that only experienced users make any
changes to these default settings.
ROM PCI/ISA BIOS
PnP/PCI CONFIGURATION SETUP
AWARD SOFTWARE, INC.
PnP OS Install : No
ITEM HELP
Reset Configuration Data : Disabled Menu Level
Resources Controlled By : Auto (ESCD) Default is Disabled.
IRQ Resources : Press Enter Select Enabled to reset
DMA Resources : Press Enter Extended System
Configuration Data
PCI/VGA Pallette Snoop : Disabled (ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
3
■
Configuration
3.26