Kontron FlexPAC, Manual

Page: 78 / 137

Load Fail-Safe Defaults
This option, located on the “Main Setup” screen, allows you to load the
troubleshooting default values that are permanently stored in the BIOS ROM.
These default settings are non-optimal and disable all high performance
features. After selecting “Load BIOS Default,” a prompt will appear asking if
you want to load the BIOS default values to CMOS RAM. Enter “Y” (for yes)
or enter “N” (for no).
Load Setup Defaults
This option allows you to load the CMOS default values into the system’s
configuration. These default settings are optimal and enable all the high
performance features. To load the Setup BIOS default values to CMOS RAM,
enter “Y” (for yes) or enter “N” (for no).
Save and Exit Setup
This option lets you determine whether to accept the modifications you have
just made, or not. If you type “Y” (for yes), you will quit the “Setup” utility
and save all changes into CMOS memory. If you type “N” (for no), you will
return to the “Setup” utility.
Exit Without Saving
Select this option to exit the “Setup” utility without saving the modifications
you have just made in this session. Type “Y” (for yes) to quit the “Setup”
utility without saving to CMOS memory. Type “N” (for no) and you will
return to the “Setup” utility.
3
■
Configuration
3.30