Kontron FlexPAC, Manual

Page: 103 / 137

Safety Summary
Please read these safety instructions before using the FlexPAC. This section
contains useful information to help maintain the reliability and performance
of your system.
1. Follow all warnings and instructions in this manual.
2. Turn “Off” and disconnect the power cord before connecting a peripheral
device. If you add or remove any peripheral devices while the power is
“On,” you may damage the system or cause injury to yourself.
3. Users are advised to purchase the latest versions of virus protection
software and use them regularly.
4. Do not attempt to service the FlexPAC yourself unless you are an
authorized Kontron service technician.
5. Do not use an unapproved power source to operate the FlexPAC. Use of
an unapproved power source may damage the unit and void the warranty.
6. Make sure the external power source is a grounded 3-prong outlet or
power strip.
7. Arrange all cables so they are out of the way of traffic, personnel and
equipment.
8. Avoid using extension cords with the FlexPAC. If an extension cord is
needed, make sure it is rated for at least 10 amperes.
9. Do not install or use any items with the FlexPAC, except those which are
designed for use with it.
10. Observe proper electrical safety precautions when performing system
maintenance.
11. Disconnect the power cord if it becomes frayed or damaged. Immediately
replace it with a new power cord. Contact Kontron customer service for
replacement cables.
12. Replace any peripheral cables with identically rated cables to those
included with the original equipment.
6
■
Maintenance & Troubleshooting
6.2