Kontron FlexPAC, Manual

Page: 28 / 137

Keyboard Touchpad
The built-in touchpad is a convenient substitute for a mouse device. Its
function is similar to that of a two-button mouse. The left button is equivalent
to the left button on a mouse and the right button is equivalent to the right
button on a mouse (see Figure 1.7). Listed below are the key features of the
integrated touchpad embedded in the keyboard.
•To move the cursor: Place your fingertip on the surface of the touchpad
and slide it across, in the direction you wish the cursor to go.
•To click: Press the touchpad’s left or right button or lightly tap on the
touchpad.
•To double click: Either press the left button twice or lightly tap the
touchpad twice in quick succession.
•There are two ways to drag:
Move the cursor to the desired location, then press down the left button.
While still holding down the left button, move the cursor to the desired
location. Then, release the left button.
Move the cursor to the desired location. Quickly tap the touchpad as if you
were double clicking however, do not move your finger after the second
tap. While maintaining contact with the touchpad, move the pointer (drag
your finger) to the desired location. Lift your finger to complete the move.
1
■
Getting Started
1.15