Kontron FlexPAC, Manual

Page: 31 / 137

I/O Connections
To expand your computing capabilities, the FlexPAC is equipped with several
interface ports and connection receptacles. These connectors support
a variety of external peripheral devices. A bi-directional parallel port, two
serial ports and two USB ports are located on the rear panel (see Figure 1.8).
In the expansion slot opening, on the side panel to the left of the display, is an
external monitor port and a 10/100 Base-T ethernet port (see Figure 1.9). The
power switch and the AC power cord receptacle are located side-by-side, on
the side panel, to the right of the display (see Figure 1.10).
Parallel Port
The FlexPAC provides a 25-pin, bi-directional parallel port for connecting
a parallel printer or another parallel peripheral device. The parallel port is
located on the rear panel of the FlexPAC (see Figure 1.8). Before using the
parallel port, refer to the documentation provided by the manufacturer of your
parallel device for information on the installation.
Serial Ports
The FlexPAC includes two 9-pin serial ports for connecting a serial printer, an
external serial mouse or other external serial devices. The serial ports are
located on the rear panel (see Figure 1.8). Upon shipment, both serial ports,
COM1 and COM2, are fixed for RS-232 use.
USB Ports
The FlexPAC provides two USB (Universal Serial Bus) ports for connecting
USB compliant devices. USB devices can be conveniently connected and
disconnected while the system is running. Please refer to the device-specific
documentation for information on connecting and using USB devices. The
USB ports are located on the rear panel below the serial ports (see Figure 1.8).
1
■
Getting Started
1.18