Kontron FlexPAC, Manual

Page: 122 / 137

Flat-Panel Fails to Display
If the flat-panel fails to display, check the following items.
• Is the power turned “On?”
• Make sure the power cable is properly connected at both ends. Is it
plugged into a proper power source?
• If the display is “On” but flickering or garbled, make sure that the right
video driver has been installed.
External CRT Monitor Fails to Display
If you have connected an external CRT monitor to the FlexPAC and it fails to
display, check the following items.
• Are the brightness and contrast controls on the monitor turned all the way
down?
• Is the monitor cable securely connected into the external monitor port?
• Is the CRT capable of displaying XGA resolutions?
Keyboard Fails to Work Properly
If you have connected a keyboard and it fails to work properly, check the
following items.
• If you have connected another keyboard other than the standard keyboard
which was supplied with the FlexPAC, make sure that the system board
supports that type of keyboard.
• Only one keyboard can be connected at any one time.
• If the keyboard you are using has a fuse, make sure that is intact and in
proper working order.
6
■
Maintenance & Troubleshooting
6.21