Kontron FlexPAC, Manual

Page: 62 / 137

Security Option
This option allows you to limit access to the “System” and to “Setup” utility.
When you select the “System” option, the system prompts for the “User
Password” every time you boot up. When you select the “Setup” option, the
system boots up and prompts for the “Supervisor Password” only when the
“Setup” utility is called up.
APIC Mode
This option determines the APIC (Advanced Programmable Interrupt
Controller) mode.
MPS Version Control for OS
This option specifies the MPS (Multi-Processor Specification) version for
your operating system. MPS version 1.4 added extended configuration tables
to improve support for multiple PCI bus configurations and improve future
expansion.
OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM
memory when running an OS/2 program. OS/2 depends on certain BIOS calls
to access memory.
Report No FDD for Win 95
If you are using Windows 95/98 without a floppy disk drive, select enabled to
release IRQ6. Its required to pass the Windows 95/98 SCT test. You should
also disable the FDC Controller option in the “Integrated Peripherals” Setup
category, when there is no floppy drive in the system. When disabled, the
BIOS will not report the missing floppy drive to Windows 95/98.
Small Logo (EPA) Show
The EPA logo appears on the right side of the monitor screen when the system
is booted up.
3
■
Configuration
3.14