Komatsu A31001, Operation & Maintenance Manual

Page: 351 / 376

Tap the column to input, and the numeric keypad is dis-
played. Input the coordinates value and tap the “OK”.
REMARK
<< button: Deletes 1 numeric number.
“OK” button: Validates the input and returns the display to
the previous screen.
“Cancel” button: Cancels the input and returns the display
to the previous screen.
6.
Confirmation screen for resetting of bucket tooth dimen-
sion is displayed. Tap the “Next” button and proceed to the
next screen.
REMARK
“Back” button: Display returns to previous screen.
RETURN button: Display returns to Machine Setup screen.
7.
When the resetting of bucket tooth dimension is complet-
ed, the screen shown right is displayed. Tap the “Set” but-
ton and save the new dimension.
Display returns automatically to the Machine Setup screen
after the saving is finished.
REMARK
“Back” button: Display returns to previous screen.
RETURN button: Display returns to Machine Setup screen.
EXECUTIONS DAILY CALIBRATION
8-41