Komatsu A31001, Operation & Maintenance Manual

Page: 154 / 376

10. The screen changes to the editing screen of Surface. Tap ENTER button. The creation of Surface is com-
pleted.
11. Tap RETURN button on the editing screen of Surface, and the creation of Surface is canceled.
METHOD FOR CREATING SURFACE BY TRIANGULATED SURFACE FROM
TOPO SURVEY
Highlight “Triangulated surface from topo survey” with “Surface type”, and tap “Next>” button.
You can create the Surface based on the Triangulated surface from Topo survey.
1.
Select the layer for the item of “Use points from layer:”.
2.
Select the layer in which the terrain observation “Topo sur-
vey” point is saved, and tap “Exit” button.
REMARK
• To return the screen to the previous screen, tap
“<Back” button.
• Tap “Cancel” button to return the screen to the editing
screen of “Surfaces”.
3.
Tap “Exit” button, and the screen changes to “Message-
Box” screen.
4.
To reflect the created Surface to currently setting Surface,
tap ENTER button.
REMARK
On this screen, even if you tap ENTER button, the setting
will not be completed.
5.
The screen changes to the editing screen of “Surfaces”.
Tap ENTER button.
The creation of Surface is completed.
6.
Tap RETURN button on the editing screen of “Surfaces”,
and the creation of Surface is canceled.
CONTROL BOX SETTING
7-38