Komatsu A31001, Operation & Maintenance Manual

Page: 151 / 376

Measure 2 arbitrary points on the existing slope, and create the Sloping Plane Surface.
7.
Measure the Coordinates of 2 points on the existing slope.
Lower the bucket edge on “A” position, and tap “Measure
Point” button.
(1) Main-fall
8.
The coordinates of “A” are displayed. Tap “A” button.
9.
Move the bucket edge to “B” position.
10. Set the bucket edge at “B” position, and tap “Measure
Point” button.
11. The coordinates of “B” are displayed. Tap “B” button.
12. “Direction” and “Grade” of “Cross-fall” are displayed. Tap
“Exit” button.
REMARK
Set “Grid interval” as needed.
SETTING CONTROL BOX
7-35