Kikusui TOS9200, Operation Manual

Page: 169 / 172

TOS9200/9201 Index I-3
REMOTE terminal 6-4
remote-control box 4-1
residual high voltages 2-4
RESPONSE 3-13
RET 3-68
RISE TIME 3-12, 3-26, 3-38
ROM version P-I
rotary knob 6-5
RS-232C 6-6
S
SCANNER 6-7
setting the repeat test 3-68
settings for AC withstanding voltage testing 3-4
SHIFT 6-4
SIGNAL I/O 6-7
SIGNAL I/O connector 4-1, 4-5
SIGNAL I/O signal 3-72
SLOW 3-14
source voltage 1-5
START 6-2
start voltage 3-11, 3-25
starting a test 3-46, 4-8, 5-4
STATUS OUT 6-6
STATUS OUT connector 4-1, 4-13
STATUS SIGNAL OUTPUT 3-59
STOP 6-1
stop bit 3-62
storing 3-62
stray capacity 3-53
strobe signal 4-9
system 3-55
T
TEST 3-59
test frequency 3-5
test judgement 5-5
test leadwire 3-44
TEST TIME 3-10, 3-24, 3-37
test voltage for DC withstanding voltage testing
3-21
the lower current 3-7, 3-22, 3-34
the upper current 3-8, 3-23, 3-36
time restriction by the output current 3-74
timing chart 3-49
To supervisor in charge of operation P-II
TOS1200 3-16, 3-28, 3-40
TOS6200 3-17, 3-29, 3-41, 5-1
TOS6200 protection 3-75
TOS9220/TOS9221 P-9
troubleshooting 7-3
turning the contact check ON/OFF 3-19, 3-31,
3-43
turning the lower judgement function ON/OFF
3-6, 3-21, 3-33
turning the timer ON/OFF 3-9, 3-24, 3-37
turning the upper judgement function ON/OFF
3-35
U
U FAIL 3-60
unpacking 1-1
UP
≤ LOW 3-70
UPPER 3-8, 3-23, 3-36
V
voltage fall time 3-12
voltage rise time 3-12, 3-26, 3-38
W
WAIT TIME 3-26, 3-38