Kikusui TOS9200, Operation Manual

Page: 137 / 172

TOS9200/9201 Part names and Functions 6-1
Chapter 6
Part names and Functions
This chapter describes the names and functions of components such as switches,
displays, and connectors on the front and rear panels.
6.1 Front Panel
Fig.6-1 Front panel
[1] POWER
Used to turn the power on/off. When the power is turned ON ( | ), the tester starts
under the same test conditions as when the power was turned off ( ) at the end of
the preceding test. To start using the factory settings, press the SHIFT key + the
POWER switch to initialize the settings. For details, see "3.17 Initialization".
• With initialization, all contents of the panel memory and stored programs are
cleared. Before starting initialization, con fi rm that no necessary data remains in
the memory.
[2] STOP
Used to suspend a test.
Also used to cancel the PASS, FAIL, and PROTECTION statuses.
After this switch is pressed, the tester enters the READY status.
[8] LCD
[5] Indicator
[1] POWER
[2] STOP
[3] START
[19] Rotary knob
[17] SHIFT
[6] FUNCTION
[7] MEMORY
[4] LOCAL/KEYLOCK
[16] F1 to F5
15 REMOTE terminal
[9] Analog voltmeter
[11] DANGER lamp
[10] Analog-voltmeter
zero adjuster
[13] LOW terminal
[14] HIGH VOLTAGE terminal
[12] LOW/GUARD
NOTE