Kikusui TOS9200, Operation Manual

Page: 42 / 172

3-4 Basic Operations TOS9200/9201
3.4 Settings for AC Withstanding Voltage
Testing
To make settings for an AC withstanding voltage test, use the AC withstanding volt-
age test screen (ACW). To jump to this screen (ACW1), press the ACW key. The
LED on the ACW lights up.
The AC withstanding voltage test screen has three pages from ACW1 to ACW3. To
move between these pages, press the SHIFT key + keys. To return to ACW1
from ACW2 or ACW3, press the ACW key.
• No setting is permitted in the KEYLOCK status.
The three ACW pages allow the following settings to be made:
ACW1
• Test voltage
• Test frequency
• Lower current (LOWER) and ON/OFF of the lower judgement function
• Upper current (UPPER)
• ON/OFF of the offset function
• Test time (TEST TIME) and ON/OFF of the timer function
ACW2
• Start voltage
• Voltage rise time (RISE TIME)
• Voltage fall time (FALL TIME)
• Output-voltage range
• SLOW/MID/FAST settings for the current detection response (RESPONSE)
• LOW/GUARD settings for the GND
ACW3
• Channel settings for the high-voltage scanner
• ON/OFF of the contact check function
To move the cursor between items, use the keys.
When a function is shown on keys F1 to F5, they can be used to jump to the target
item. To make settings for the items to be displayed on these keys, press the SHIFT
key + F1 to F5 keys.
NOTE